Product Reviews

Silkland DP80 DisplayPort Cable Review

A compact high bandwidth DisplayPort cable for gamers with nearby DP 2.1 equipment and little slack to spare.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The Silkland 80Gbps Short DisplayPort 2.1 Cable [VESA Certified] 1.6FT DP80 review comes down to fit: this cable is built for a close connection between a computer and monitor, with headroom for demanding high refresh rate displays.

Silkland DP80 Review Summary

The quick verdict

Silkland DP80 DisplayPort Cable
4.7/5

2,000+ ratings

Read Amazon Reviews

Silkland DP80 DisplayPort Cable

A compact high bandwidth DisplayPort cable for gamers with nearby DP 2.1 equipment and little slack to spare.

  • VESA-certified DisplayPort 2.1 DP80 cable with up to 80Gbps bandwidth.
  • Listed uncompressed modes include 4K at 240Hz, 8K at 60Hz and 2K at 540Hz; DSC-enabled modes include up to 16K at 60Hz and 8K at 240Hz.
  • Supports UHBR20, dynamic HDR10+, HDCP 2.3, 3D, VRR, FEC, ALLM, DSC 1.2a and MST.
  • Backward compatible with DisplayPort 2.0 and 1.4, with uncompressed 7.1, 5.1 and 2.0 audio pass-through.

Pros

  • High bandwidth and demanding refresh-rate modes for compatible displays.
  • Short reach can reduce excess cable on a close, compact setup.

Consider before buying

  • At 1.6 feet, it leaves little room to route between more widely spaced ports.
  • The highest listed modes rely on DSC or compatible equipment, so check the source, display and desired mode together.
Read the full review summary

This 1.6-foot DisplayPort to DisplayPort cable combines VESA certification, DP 2.1 support and up to 80Gbps bandwidth.

Its listed modes include uncompressed 4K at 240Hz, 8K at 60Hz and 2K at 540Hz; higher modes such as 16K at 60Hz and 8K at 240Hz are listed with DSC enabled.

Dynamic HDR10+, HDCP 2.3, 3D, variable refresh rate features and multistream support round out the gaming and display feature set.

The short length is the defining buying decision. It can suit a tidy desk, a monitor mounted close to a desktop or a compact setup where excess cable would get in the way.

The 80Gbps ceiling depends on compatible source and display hardware, and Silkland notes both ends should ideally support DisplayPort 2.1 UHBR20. Check the port locations and required reach before choosing it.

The buying factors

Silkland DP80 Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Bandwidth ceiling

Up to 80Gbps is substantial headroom for compatible DP 2.1 equipment.

9/10

High refresh support

The listed uncompressed modes include 4K at 240Hz and 2K at 540Hz.

8/10

Compact setup fit

A 1.6-foot reach can keep a close monitor connection tidy, provided the ports are near each other.

8/10

Build details

Nylon exterior, triple shielding, tinned copper conductors and gold-plated connectors are specified.

7/10

Compatibility clarity

It supports DisplayPort and DisplayPort++ and is backward compatible, though maximum modes depend on both connected devices.

5/10

Everyday flexibility

The very short reach is useful for compact arrangements but restrictive when devices sit farther apart.

Key Features and Specifications of Silkland DP80

  • VESA-certified DisplayPort 2.1 DP80 cable with up to 80Gbps bandwidth.
  • Listed uncompressed modes include 4K at 240Hz, 8K at 60Hz and 2K at 540Hz; DSC-enabled modes include up to 16K at 60Hz and 8K at 240Hz.
  • Supports UHBR20, dynamic HDR10+, HDCP 2.3, 3D, VRR, FEC, ALLM, DSC 1.2a and MST.
  • Backward compatible with DisplayPort 2.0 and 1.4, with uncompressed 7.1, 5.1 and 2.0 audio pass-through.
  • Male-to-male DisplayPort connectors, without a latch, and a 1.6-foot cable length.
  • Build includes 24K gold-plated connectors, 28AWG tinned copper conductors, triple shielding and a nylon exterior.
  • Silkland describes a 24-month service period and technical support within 18 hours.

Pros and Cons of Silkland DP80

Pros

  • High bandwidth and demanding refresh-rate modes for compatible displays.
  • Short reach can reduce excess cable on a close, compact setup.
  • Backward compatibility supports use with earlier DisplayPort versions.
  • No-latch connectors avoid a release mechanism when unplugging.
  • Shielding and braided nylon are useful construction details for a frequently handled desk cable.

Consider before buying

  • At 1.6 feet, it leaves little room to route between more widely spaced ports.
  • The highest listed modes rely on DSC or compatible equipment, so check the source, display and desired mode together.
  • The no-latch design does not provide a locking connector; consider how secure the cable needs to be in your setup.

Who Should Buy Silkland DP80?

Good fit

Consider the Silkland DP80 if your computer and monitor sit close together and you want a short cable with substantial DisplayPort bandwidth.

It is particularly relevant when your display can use high refresh rates and both connected devices have the required DisplayPort capabilities.

Before ordering, measure the route from port to port, including any bend needed at either end. Then confirm that the GPU and monitor support your intended resolution, refresh rate and DSC requirements.

VESA certification and the stated backward compatibility are useful, but the cable alone cannot enable a mode the connected devices do not support.

Who should skip it

Choose a longer cable if your tower is under a desk, your monitor is on an arm, or the cable needs to follow a longer path.

A 1.6-foot cable can be too restrictive even when the devices themselves are compatible.

Look elsewhere if you need HDMI, USB or another connector type, or if your setup benefits from a locking latch. This is a male-to-male DisplayPort cable with a no-latch design.

What the Silkland DP80 means for a compact gaming setup

A high ceiling with equipment-dependent modes

The 80Gbps DP80 specification is aimed at newer, high bandwidth displays and graphics hardware.

The listed uncompressed modes and DSC-enabled maximums describe different operating conditions, so match the target resolution and refresh rate against both ends of the connection.

The description specifically recommends DP 2.1 UHBR20 support on the graphics card and monitor for the best fit.

The 1.6-foot length is a layout choice

Short cables can make sense when the PC is beside or directly below a monitor and the connection needs minimal slack.

The same length can become awkward if the ports face away from each other or the cable must travel around a desk edge. Measure the actual route rather than relying only on the straight-line distance between devices.

Build and connector handling

The cable uses 28AWG tinned copper, triple shielding, gold-plated connectors and a nylon exterior. These are construction choices intended for signal protection and regular handling; they do not change the need to connect compatible DisplayPort ports.

The connectors have no latch, which may make removal straightforward, while offering no locking engagement.

Compatibility beyond the headline bandwidth

The cable supports DisplayPort and DisplayPort++ devices and is listed as backward compatible with DP 2.0 and DP 1.4. It also includes audio pass-through and gaming-related features such as VRR and MST.

For a multi-monitor plan, confirm how the computer and displays support MST and whether the desired resolutions and refresh rates can be maintained across the configuration.

Alternatives to Silkland DP80

Computer DisplayPort Cables alternative

Silkland 80Gbps DisplayPort Cable, 6.6 ft
4.7/5

2,000+ ratings

Read Amazon Reviews

Silkland 80Gbps DisplayPort Cable, 6.6 ft

Choose the 6.6-foot option if your setup needs more reach while keeping the same bandwidth class and similar listed display modes.

The reviewed 1.6-foot version is the better fit when slack is unwelcome and the ports are very close.

  • This DP80 cable is 6.6 feet long and lists uncompressed 4K at 240Hz, 8K at 60Hz and 2K at 540Hz, plus DSC-enabled modes and a 24-month service period.
  • The reviewed DP80 cable provides the same 80Gbps bandwidth class and a 1.6-foot reach for closely placed devices.

Computer DisplayPort Cables alternative

Silkland 54Gbps DisplayPort 2.1 Cable, 10 ft
4.6/5

7,000+ ratings

Read Amazon Reviews

Silkland 54Gbps DisplayPort 2.1 Cable, 10 ft

Consider the 10-foot 54Gbps model if routing distance is the priority and its listed modes suit your devices. Keep the DP80 if you need the higher stated bandwidth and have a close connection.

  • This 10-foot cable lists 54Gbps bandwidth, support for uncompressed 4K at 240Hz and 8K at 120Hz, and DSC-enabled modes; it also has a braided exterior.
  • The reviewed cable emphasizes up to 80Gbps and a compact 1.6-foot length.

Is Silkland DP80 Worth It?

The Silkland DP80 DisplayPort Cable is worth considering for a compact desk where a 1.6-foot connection reaches comfortably and the source and monitor can use its high bandwidth capabilities.

Its VESA certification, 80Gbps class and listed high refresh modes make it a capable match for a current gaming display setup.

Measure first and verify the exact mode you want against both devices, especially for DSC-enabled maximums.

If your equipment sits farther apart, the short length is the central tradeoff; if it fits, this cable offers a focused, well-specified connection without much excess slack.

Your review at a glance

Silkland DP80 DisplayPort Cable
4.7/5

2,000+ ratings

Read Amazon Reviews

Silkland DP80 DisplayPort Cable

A compact high bandwidth DisplayPort cable for gamers with nearby DP 2.1 equipment and little slack to spare.

  • VESA-certified DisplayPort 2.1 DP80 cable with up to 80Gbps bandwidth.
  • Listed uncompressed modes include 4K at 240Hz, 8K at 60Hz and 2K at 540Hz; DSC-enabled modes include up to 16K at 60Hz and 8K at 240Hz.
  • Supports UHBR20, dynamic HDR10+, HDCP 2.3, 3D, VRR, FEC, ALLM, DSC 1.2a and MST.
  • Backward compatible with DisplayPort 2.0 and 1.4, with uncompressed 7.1, 5.1 and 2.0 audio pass-through.

Written by

computertechnician.net Editorial Team

Editorial team

Independent editorial coverage of practical computer care.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

Silkland DP80 DisplayPort Cable

Silkland DP80 DisplayPort Cable

A compact high bandwidth DisplayPort cable for gamers with nearby DP 2.1 equipment and little slack to spare.

  • VESA-certified DisplayPort 2.1 DP80 cable with up to 80Gbps bandwidth.
  • Listed uncompressed modes include 4K at 240Hz, 8K at 60Hz and 2K at 540Hz; DSC-enabled modes include up to 16K at 60Hz and 8K at 240Hz.
Check Video Reviews on Amazon